This is really something that, if you are not confident with the 3D model itself before printing, you must go in and fix yourself… but don’t worry, you can do so with just a few common sense steps using CraftWare. Let’s start out by saying that the standard setup for Extrusion Width (settings are located […]
Supports are the additional build towers that help to, well, support your print and they are necessary to make certain prints exist -your can’t just print in thin air! CraftWare has a great auto-support option, designed to provide a high and safe success rate of getting the object that you want in the end, but custom […]
Stringing is that inconvenient situation in which you get those spiderweb looking hairs in the empty parts of your print, hanging between two solid areas. There are two main ways to fix these. The easiest may be to just print at a slightly lower temperature, in the situation that the temp is too high for […]
Every print has a different characteristic due to it’s physical qualities. While the default print settings will in general be able to get a great print from most any object, there are some exceptions you may come across in the situation in which you would like to to achieve the “optimal” results. Through experience you […]
Ringing is what we call the small waves or shadows that usually appear around sharp corners on a print. It’s often very apparent if you have text on your print as you will see what looks like shadows of the text. This happens when the print head makes a sudden direction change and the […]
