SIMPLiFY3D V5 GCODE Issue resolution

The new SIMPLIFY3D V5 generates GCODE not compatible with Craftbot Pr3Dator firmware. The slicer generated GCODE create M106 (fan controll) command with “P” parameter, not compatible.The solution is to create a post processor script in the SimpliFy3D, change. {DELETE “P0”} in the “Post Processing” tab.

Craftbot FLOW IOT – remote access setup

If you want to use our IOT solution and setup the printer to have remote access, please follow these steps to register your printer. (Please note: IOT service is only available for FLOW generation printers) Please resister an account on Craftbot.com website (free) Fill out the form on https://craftbot.com/Me/Signup Confirm your email address Login to […]

Set filament tension

The tension of the extruder can be easily adjusted via the screw pictured below. Turning this screw clockwise (right) will reduce the tension, while turning counterclockwise (left) will increase it. Dialing this in should help remedy most FMS and extrusion issues. turn left = tension increase turn right = tension decrease If you continue to […]