Flow upgraded (MK2) extruder install guide!

Here is the video for the installation steps Specification and information: The new upgraded Flow Filament Extruder just for 159 USD/EUR is coming to elevate your 3D printing to a next level! Using innovative technology, our engineers worked hard to bring you a filament extruder to keep up with your 3D printing desires. With this […]

Set machine mechanical properties

M5001 XY Z E  XY: diameter of the pulleyZ: pitchE: diameter of the cog wheel example: (these are the default factory settings) M5001 X9.01 (in mm) M5001 E10.8 (in mm) M5001 Z2.0 (in mm) can be combined: M5001 X9.01 E10.8 Z2.0 CBP M5001 answer: ok XY_diameter:9.010000 , Z_pich:2.000000 , E_diameter:10.800000 X-Y

SIMPLiFY3D V5 GCODE Issue resolution

The new SIMPLIFY3D V5 generates GCODE not compatible with Craftbot Pr3Dator firmware. The slicer generated GCODE create M106 (fan controll) command with “P” parameter, not compatible.The solution is to create a post processor script in the SimpliFy3D, change. {DELETE “P0”} in the “Post Processing” tab.