Set machine mechanical properties

M5001 XY Z E  XY: diameter of the pulleyZ: pitchE: diameter of the cog wheel example: (these are the default factory settings) M5001 X9.01 (in mm) M5001 E10.8 (in mm) M5001 Z2.0 (in mm) can be combined: M5001 X9.01 E10.8 Z2.0 CBP M5001 answer: ok XY_diameter:9.010000 , Z_pich:2.000000 , E_diameter:10.800000 X-Y

SIMPLiFY3D V5 GCODE Issue resolution

The new SIMPLIFY3D V5 generates GCODE not compatible with Craftbot Pr3Dator firmware. The slicer generated GCODE create M106 (fan controll) command with “P” parameter, not compatible.The solution is to create a post processor script in the SimpliFy3D, change. {DELETE “P0”} in the “Post Processing” tab.

Craftbot FLOW IOT – remote access setup

If you want to use our IOT solution and setup the printer to have remote access, please follow these steps to register your printer. (Please note: IOT service is only available for FLOW generation printers) Please resister an account on Craftbot.com website (free) Fill out the form on https://craftbot.com/Me/Signup Confirm your email address Login to […]