What file formats are supported by CraftWare?
Currently, Craftware supports two types of files: .stl | .obj |
Home » Archives for István Solymosi » Page 17
Author: István Solymosi
Where can I get 3D files already designed?
You can browse through different designs on: https://www.thingiverse.com/ https://www.myminifactory.com https://pinshape.com http://www.yeggi.com/ If you have a custom print and wish to share your work, feel free to upload it and pass the joy along!
How to remove the filament from the extruder on the Craftbot and the Craftbot plus?
Please refer to page 11 of the owners manual section: “Removing the filament from the extruder” REMOVING THE FILAMENT FROM THE EXTRUDER Never remove the fiament from the extruder if the extruder is cold! Always preheat the extruder before removing or changing filaments. Removing the filament from a cold extruder might damage it! You don’t have to […]
What is the maximum build size of the CraftBot XL?
The build area on the CraftBot XL is 300 x 200 x 440 mm, or about 12″ x 8″ x 17″ inches. This however is not the maximum size of a print which you can create with your machine – you can always print in parts and assemble them together later into one huge print!
How to set the CraftBot language?
Please refer to page 9 of the owners manual section: “Setting the language” SETTING THE LANGUAGE • Select „Settings” on the LCD menu. • Navigate to the right with the arrow. • Choose LNG. • Select the desired language. • Confim selection. • Use the left arrow to get back to the main menu.