That “squished” bit of print materials that occurs right where the print touches the heated bed -that’s what we call “Elephant Foot”, and if you are a very detail oriented user, or if your specific print, and it’s after print use requires of you to be very precise, you may want to use a few […]
You can find and download the latest Craftware user manual from the following link: Filament Profiles:
When printing / slicing objects, its always a good idea to see how much time & material the object will consume in the print. Less is better, however there will be parts and surfaces that will require a structural support (so that the object will not collapse). But keep in mind, supports can take their […]
First of all, CraftWare is a slicer program and not a design program. However, if you have an object that is too tall to fit in your build area, but not too wide, you can pick a layer in the middle of the print and drag it down through the virtual buildplate. Then make a […]
We recommend different layer height for different nozzle sizes (Maximum layer height: nozzle size x 0.8, Minimum layer height: nozzle size / 4) For 0.8 mm nozzle: 0.6 mm – 0.2 mm – Lower details, but faster prints For 0.6 mm nozzle: 0.45 mm – 0.15 mm For 0.4 mm nozzle: 0.3 mm – 0.1 […]
