Filament
Filament profiles for Craftware program. Craftware profiles
Tag: Videos
Flow tutorial videos
Calibration: Single: Dual: How to insert the buildplate: How to load filament: How to unload filament: How to update the firmware: How to replace the nozzle: How to do the Z leveling: NOTE: You do not have to remove the mainboard from the […]
How do I add a kapton sheet to my build plate on my Craftbot or Craftbot Plus printer?
Applying a new layer of protective Kapton sheet to your buildplate Build plate kapton sheets get worn out in time, or can be damaged by the nozzle due to incorrect leveling. Reapplying a new kapton sheet is essential to maximize print qualities if the old one has issues. To reapply a new kapton sheet, take […]
Unpacking your CraftBot or Craftbot Plus printer
Here is some quick start up info (taken from the quick start guide), but for the best in-depth information please check out the owners manual at https://craftunique.com/docs/craftbot-user-manual For our official unboxing video, check out this link, Unpackaging Step #1 Remove the large sheet resting under the foam. Under the sheet you will find […]
Getting started with your FLOW IDEX generation printer
Thank You for your purchase! To give you the most convenient experience with your new printer we made several documents and useful videos. You can find the user guide here, please read it before start using the printer: FLOW IDEX Please watch these videos to get familiar our unboxing, setup and calibration process.