The FLOW series printers have a web administration page, which offers the ability to directly control and monitor your printer via a desktop or mobile web browser. To access this page, type your printer’s IP address into your preferred web browser. If this is your first time accessing this feature, you’ll need to login […]
Please refer to page 11 of the owners manual section: “Removing the filament from the extruder” REMOVING THE FILAMENT FROM THE EXTRUDER Never remove the fiament from the extruder if the extruder is cold! Always preheat the extruder before removing or changing filaments. Removing the filament from a cold extruder might damage it! You don’t have to […]
The build area on the CraftBot XL is 300 x 200 x 440 mm, or about 12″ x 8″ x 17″ inches. This however is not the maximum size of a print which you can create with your machine – you can always print in parts and assemble them together later into one huge print!
Please refer to page 9 of the owners manual section: “Setting the language” SETTING THE LANGUAGE • Select „Settings” on the LCD menu. • Navigate to the right with the arrow. • Choose LNG. • Select the desired language. • Confim selection. • Use the left arrow to get back to the main menu.
For legacy printers (the original Craftbot, Craftbot 2, Craftbot PLUS, Craftbot XL, Craftbot 3), please download the last supported version from HERECraftprint v1.15 and pr3Dator20220201 firware is compatible only the Craftbot Plus Pro printers. Firmware update From time to time you may want to look into updating your firmware (the special software which provides control […]
