There are some cases when the automatic Z leveling fail during the calibration after several attempts. This is because the Z height is not picked up correctly after it’s set by the user. The manual Z leveling can help to make the two head on the same level and the calibration will be successful. Heat […]
Octopi / Octoprint is a web based 3D printer management solution. You can find information and setting up the OctoPi or OctoPrint device here: https://octoprint.org/download/ On Craftbot side we recommend a good quality USB cable to connect the OctoPi device with Craftbot. These are the settings available from pr3Dator_firmware_2019-03-06. But please always use the latest […]
If every other official way is not working to update the Pr3Dator board and the HMI program you can use this program to recover the FW Unzip to a folder and run as admininstrator.
You can find the installation manual for the Craftbot Plus and Craftbot Plus XL printers attached. For the upgrade you have to print a back cover part, please find attached the g-code and the .stl of it.
