CraftBot / XL factory FW update program
When the printer is not detected by the CraftPrint or the FW update process stuck always a point you can try this program.
Tag: How-to
How can set the Z endstop switching distance
Sometimes the buildplate is too far or too close to the nozzle and the leveling knobs are not able to set the right position. In this case you can set the Z level by moving the little metal clamp on the left hand side of the buildplate. There is two scre holding the metal clamp […]
Craftbot FLOW (XL) full specification
PRINTING PROPERTIES FLOW FLOW XL Printing technology Fused Filament Fabrication (FFF) Printing head All metal hotend with Filament Monitoring system (FMS) Build volume X: 300mm x Y: 200mm x Z: 250mm X: 300mm x Y: 200mm x Z: 500mm Theoretical precision X,Y: 4 microns, Z: 2 microns Layer resolution For 0.4mm nozzle recommended 50-300 microns […]
Converting FLOW fanset to cable version
Manual Z leveling FLOW IDEX printer
There are some cases when the automatic Z leveling fail during the calibration after several attempts. This is because the Z height is not picked up correctly after it’s set by the user. The manual Z leveling can help to make the two head on the same level and the calibration will be successful. Heat […]