Here is some quick start up info (taken from the quick start guide), but for the best in-depth information please check out the owners manual at https://craftunique.com/docs/craftbot-user-manual For our official unboxing video, check out this link, Unpackaging Step #1 Remove the large sheet resting under the foam. Under the sheet you will find […]
CraftBot FLOW Generation printers can send an E-Mail notification if there is a problem occurred during the print. For the E-Mail sending you have to set up a email account for sending. We recommend to use GMAIL. Register an E-Mail account on GMAIL and use it’s settings sending notifications. Please read this article, how to […]
Door installation Please unplug the printer before assembling the door! To complete this process you will need: 2,0 and 1,5 Hex wrench. Connect the cable to the magnet lock. Insert the magnetic lock into the printer (picture below) and secure the cable to the metal frame. Connect the cable’s end to […]
Thank You for your purchase! To give you the most convenient experience with your new printer we made several documents and useful videos. You can find the user guide here, please read it before start using the printer: FLOW IDEX Please watch these videos to get familiar our unboxing, setup and calibration process.
Thank You for your purchase! To give you the most convenient experience with your new printer we made several documents and useful videos. You can find the user guide here, please read it before start using the printer: FLOW SINGLE Please watch these videos to get familiar our unboxing: Calibration process: How to insert the […]
