| PRINTING PROPERTIES |
FLOW IDEX |
FLOW IDEX XL |
| Printing technology |
Fused Filament Fabrication (FFF) |
| Printing heads |
Independent Dual Extruders (IDEX) with Filament Monitoring system (FMS) |
| Build volume |
X: 425mm x Y: 250mm x Z: 250mm |
X: 425mm x Y: 250mm x Z: 500mm |
|
Single head (X,Y,Z)
|
386 x 250 x 250 |
386 x 250 x 500 |
| Dual head (X, Y, Z) |
351 X 250 X 250 |
351 X 250 X 500 |
| Mirror mode (X, Y, Z) |
396(2×198) X 250 X 250 |
396(2×198) X 250 X 500 |
| Parallel mode (X, Y, Z) |
425(2×212.5) x 250 x 250 |
425(2×212.5) x 250 x 500 |
|
|
| Theoretical precision |
X,Y: 4 microns, Z: 2 microns |
| Layer resolution |
For 0.4mm nozzle recommended 50-300 microns |
| Travel speed |
Up to 160mm/s |
| Print speed |
Up to 160mm/s |
| Build speed |
0.4mm nozzle: up to 19.2 mm³/sec |
| Build plate |
Heatable, magnetic build plate, with removable spring steel build surface |
| Build plate temperature |
40 – 110°C |
| Filament diameter |
1.75mm |
| Supported materials |
PLA, ABS, HIPS, PET-g, Nylon, TPU, PVA, Moldlay (wax like), up to 300°C |
| Nozzle diameter |
Default: 0.4mm, supplied: 0.25mm, 0.4mm, 0.6mm, 0.8mm |
| Nozzle temperature |
40 – 300°C |
| Hotend |
All metal hotend |
| Extruder |
Dual drive extruder, ratio: 5,06:1 |
| CALIBRATION |
| Build plate calibration |
Assisted bed calibration |
| XY calibration |
Fully automatic, no intervention required |
| POWER REQUIREMENTS |
| Voltage range |
90-264V |
| Frequency range |
47-63Hz |
| Power factor |
PF>0.95/230VAC |
| Efficiency (Typ.) |
94,5% |
| Power MAX |
500W, 5.5A |
| OTHERS |
| Display |
5 inch, active matrix color display 800 x 480 pixels |
| Connectivity |
Wi-Fi, LAN, USB, Flash drive |
| Internal storage |
4GB, non removable |
| Wi-Fi |
IEEE 802.11b/g compatible |
| Monitoring |
IOT Web interface, Live camera |
| Camera resolution |
5MP, Stream output 800 x 600 |
| Operating noise level |
50dBA |
| Optional accessories |
Glass door, ventilated PET-g dome |
| OPERATING CONDITIONS |
| Operating ambient temperature |
10-35 °C |
| Humidity |
10-90% RH, non-condensing |
| Storage temperature |
0-35°C |
| SOFTWARE |
| Supplied software |
CraftWare, Craftware Pro |
| Supported OS |
Windows, macOS, Linux |
| Supported file types |
STL, OBJ, 3mf |
