CraftBot FLOW Generation printers can send an E-Mail notification if there is a problem occurred during the print. For the E-Mail sending you have to set up a email account for sending. We recommend to use GMAIL. Register an E-Mail account on GMAIL and use it’s settings sending notifications. Please read this article, how to […]
Please find the door installation video: Please find the door installation user guide here:
Windows and Linux users FW update Installation Download the latest Firmware for the FLOW 3D printers at https://craftbot.com/firmware Copy CRAFT_UPDATE.ZIP to a FAT32 formatted usb drive (The name should be the same as “CRAFT_UPDATE.ZIP” without any space or numbers) If a usb cable is connected to the printer’s side, disconnect it Put the pendrive in to […]
Battery is on the main board. It gives enough power to the CPU to save the print state at a power loss. Every CraftBot printer can continue print process after a power outage. Battery warning is a sensing error if the printer is at long period off – like transportation. It goes away if you […]
