The Company warrants that the Product shall conform in all respects with its Product Description for the period of 12 month from the physical transfer to the Consumer, or for the term in excess of 12 months complying with relevant applicable national rules of the Consumer’s domicile, but no longer than 24 months (hereinafter referred […]
Craftbot can be used with PLA, ABS, HIPS, Laywood, Nylon, etc. Probably the most easiest-to-use material of them all is PLA (excellent choice for beginners), since its material properties, such as very low shrinkage, inflict little degrade upon your print quality (not to mention that PLA does not emit any toxic fumes while printing). […]
The CraftBot Plus and the CraftBot 2 can print any object in scale, as long as its within the given build space, which is: 250 x 200 x 200 mm (about 10 x 8 x 8 inches). This doesn’t mean that you can’t make a larger print though; if your intended print is larger than […]
Applying a new layer of protective Kapton sheet to your buildplate Build plate kapton sheets get worn out in time, or can be damaged by the nozzle due to incorrect leveling. Reapplying a new kapton sheet is essential to maximize print qualities if the old one has issues. To reapply a new kapton sheet, take […]
Preventing/Fixing a clogged extruder The number one inconvenience that you will run across when 3D printing is clogging of the extruder. But we have good news for you! -these problems can be easily avoided by following a few simple rules of “3D printing etiquette”. First, always wait until the extruder and heated buildplate are […]
