CraftBot tooldisk sample test object
This is a test object you can print with CraftBot machines. The height of the disk is to set the heatbreak and heatsink distance. The wrench shape helps to service the hotend.
Home » Tips and tricks » Page 6
Tag: Tips and tricks
Filament
Filament profiles for Craftware program. Craftware profiles
Flow printer dome fan not operating
Problem description: Flow generation printer’s fan doesn’t operating at all. Cause: Supplier error, interchanged cables. Identification: Please, ask the cutomer, to check according to the attached document, and to send a photo of his fan wireing. Solution: We offer spare fan to everyone upon fan photo and serial number of printer. Other: If the user […]
Finding the serial number of Craftbot printers
You can find the serial number of a printer on two stickers. One is a white sticker with barcode on the inside of the printer, near the back of the touch screen. The other is on the back of the printer on a silver sticker. The serial number is the same, use whichever is more […]
CraftBot FLOW IDEX (XL) build volume
Total printing area: 425 x 250 x 250 (500) Printing modes: Single printer head: 386 x 250 x 250 (500) Dual printer head: 351 X 250 X 250 (500) Mirror printing: 396(2×198) X 250 X 250 (500) Parallel mode printing:425(2×212.5) x 250 x 250 (500)