Craftbot Printers power consumption
Every Craftbot printer is using 500W Meanwell PSU Printer Model Peak consumption Average while printing Craftbot Pro Plus 250W 150W FLOW (single head) 400W 250W FLOW IDEX 450W 300W
Home » Tips and tricks » Page 5
Tag: Tips and tricks
Flexible filament and FMS sensor
When printing with soft flexible filament the FMS sensor cannot detect the right amount of filament correctly. It is because the filament is stretching so the filament flow is not mach the extrusion eaxctly. This situation cause false filament flow error detection. We recommend to turn of the FMS sensor in the settings menu while […]
Printing with flexible filament
Craftbot FLOW generation extruder is very capable to print soft flexible filament. For good result always do the following: – Swap the build sheet and print on the metal side. It helps to easily remove the object when it finished. – Use low print speed. A very soft material maybe need around 20-30mm/s print speed […]
Inspecting the Flow Gen Dome Fan Ventilator
Start and End GCODE script
When you want to setup a slicer software, you have to write a proper start and end script for the printer. Here are some examples and recommendation for our printers. CraftBot – Plus, 2, Pro Plus, XL Start GCODE: G28 X0 Y0; Home X and YG28 Z0; Home ZG21 ; mmG90 ; absG92 E0 ; […]