We recommend different layer height for different nozzle sizes (Maximum layer height: nozzle size x 0.8, Minimum layer height: nozzle size / 4) For 0.8 mm nozzle: 0.6 mm – 0.2 mm – Lower details, but faster prints For 0.6 mm nozzle: 0.45 mm – 0.15 mm For 0.4 mm nozzle: 0.3 mm – 0.1 […]
You can browse through different designs on: https://www.thingiverse.com/ https://www.myminifactory.com https://pinshape.com http://www.yeggi.com/ If you have a custom print and wish to share your work, feel free to upload it and pass the joy along!
The standard default speed of the CraftBot is 60mm/second, although the firmware will allow you to successfully print at speeds up to 120mm/second. For the greatest precision on very difficult print models, those with small micron/layer details, we recommend printing at 40mm/second, which by-the-way is the typical industry standard speed amongst many of the leading […]
The Company warrants that the Product shall conform in all respects with its Product Description for the period of 12 month from the physical transfer to the Consumer, or for the term in excess of 12 months complying with relevant applicable national rules of the Consumer’s domicile, but no longer than 24 months (hereinafter referred […]
Craftbot can be used with PLA, ABS, HIPS, Laywood, Nylon, etc. Probably the most easiest-to-use material of them all is PLA (excellent choice for beginners), since its material properties, such as very low shrinkage, inflict little degrade upon your print quality (not to mention that PLA does not emit any toxic fumes while printing). […]
