Connect Orca Slicer to you Craftbot Printer

Starting with the 2025_07_25 Flow firmware and the Craftbot Plus/Pro/XL/3 firmware from 2019 you can use the Orca Slicer “Print” function.

Here is how you can setup:

FLOW Generation printers

Click on the wireless network icon next to the printer name

Select CraftbotFLow in the dropdown list

Fill out the IP address, user and password filed and click TEST.

IP, Username and password was set when you configured the IOT functions. If you not done it yet here you can find the process.

If the test was successfull you can upload and start the print from the Orca Slicer

Craftbot, Plus, Pro, XL, 3

!!!YOU NEED TO PLUG A FAT32 FORMATTED PENDRIVE INTO THE SCREEN TOP USB PORT!!!

Click on the wireless network icon next to the printer name
Select CraftbotPlus in the Host type. Enter printer IP addres.

If the test was successfull you can upload and start the print from the Orca Slicer