Craftbot Plus (Pro) User Manuals
You can download the .pdf user manual of our Craftbot Plus (Pro) 3D printer from here.
Home » Craftbot Printers » Page 17
Craftbot Printers
Elephant foot – deformity where print touches the heated bed
That “squished” bit of print materials that occurs right where the print touches the heated bed -that’s what we call “Elephant Foot”, and if you are a very detail oriented user, or if your specific print, and it’s after print use requires of you to be very precise, you may want to use a few […]
How thick are the layers printed with CraftBot ?
We recommend different layer height for different nozzle sizes (Maximum layer height: nozzle size x 0.8, Minimum layer height: nozzle size / 4) For 0.8 mm nozzle: 0.6 mm – 0.2 mm – Lower details, but faster prints For 0.6 mm nozzle: 0.45 mm – 0.15 mm For 0.4 mm nozzle: 0.3 mm – 0.1 […]
Where can I get 3D files already designed?
You can browse through different designs on: https://www.thingiverse.com/ https://www.myminifactory.com https://pinshape.com http://www.yeggi.com/ If you have a custom print and wish to share your work, feel free to upload it and pass the joy along!
How to remove the filament from the extruder on the Craftbot and the Craftbot plus?
Please refer to page 11 of the owners manual section: “Removing the filament from the extruder” REMOVING THE FILAMENT FROM THE EXTRUDER Never remove the fiament from the extruder if the extruder is cold! Always preheat the extruder before removing or changing filaments. Removing the filament from a cold extruder might damage it! You don’t have to […]
