Every Craftbot printer is using 500W Meanwell PSU Printer Model Peak consumption Average while printing Craftbot Pro Plus 250W 150W FLOW (single head) 400W 250W FLOW IDEX 450W 300W
There are some cases when the automatic Z leveling fail during the calibration after several attempts. This is because the Z height is not picked up correctly after it’s set by the user. The manual Z leveling can help to make the two head on the same level and the calibration will be successful. Heat […]
When printing with soft flexible filament the FMS sensor cannot detect the right amount of filament correctly. It is because the filament is stretching so the filament flow is not mach the extrusion eaxctly. This situation cause false filament flow error detection. We recommend to turn of the FMS sensor in the settings menu while […]
Craftbot FLOW generation extruder is very capable to print soft flexible filament. For good result always do the following: – Swap the build sheet and print on the metal side. It helps to easily remove the object when it finished. – Use low print speed. A very soft material maybe need around 20-30mm/s print speed […]
