If your filament is getting eaten up by the gear before it enters the extruder channel to be heated up (AKA “grinding”), the most likely cause is an entirely or partially clogged extruder. If this is the case you will need to consult the tips on “How to fix a clogged extruder”. If the […]
That “squished” bit of print materials that occurs right where the print touches the heated bed -that’s what we call “Elephant Foot”, and if you are a very detail oriented user, or if your specific print, and it’s after print use requires of you to be very precise, you may want to use a few […]
We recommend different layer height for different nozzle sizes (Maximum layer height: nozzle size x 0.8, Minimum layer height: nozzle size / 4) For 0.8 mm nozzle: 0.6 mm – 0.2 mm – Lower details, but faster prints For 0.6 mm nozzle: 0.45 mm – 0.15 mm For 0.4 mm nozzle: 0.3 mm – 0.1 […]
You can browse through different designs on: https://www.thingiverse.com/ https://www.myminifactory.com https://pinshape.com http://www.yeggi.com/ If you have a custom print and wish to share your work, feel free to upload it and pass the joy along!
Please refer to page 11 of the owners manual section: “Removing the filament from the extruder” REMOVING THE FILAMENT FROM THE EXTRUDER Never remove the fiament from the extruder if the extruder is cold! Always preheat the extruder before removing or changing filaments. Removing the filament from a cold extruder might damage it! You don’t have to […]
