With the allmetal hotend you can override the default 260C°temperature limit to 300C° You have to add these lines to the startup GCODE M4003 S300; set limit 300C M104 S300 ; start heating extruder to 300C You can set the temperature 260-300C according to your needs !!!!CAUTION IF YOU SET THE OLD CUHEAD TO 300C° IT WILL DAMAGE THE […]
M5001 XY Z E XY: diameter of the pulleyZ: pitchE: diameter of the cog wheel example: (these are the default factory settings) M5001 X9.01 (in mm) M5001 E10.8 (in mm) M5001 Z2.0 (in mm) can be combined: M5001 X9.01 E10.8 Z2.0 CBP M5001 answer: ok XY_diameter:9.010000 , Z_pich:2.000000 , E_diameter:10.800000 X-Y
The new SIMPLIFY3D V5 generates GCODE not compatible with Craftbot Pr3Dator firmware. The slicer generated GCODE create M106 (fan controll) command with “P” parameter, not compatible.The solution is to create a post processor script in the SimpliFy3D, change. {DELETE “P0”} in the “Post Processing” tab.
This sidecover helps you to make the FLOW printer fully closed with dome and door. You can download the ready made GCODE or you can have the STL and slice it to your needs: Print settings: Recommended material PET-G, 0.4mm nozzle, 0.2mm layer After print, please free the spring line gently by handHelp the button […]
TEST Report BCTC2003000163-1E_CraftBot Flow Idex 3D 62311 BCTC2003000163-2E_CraftBot Flow Idex 3D printer 301489 EMC BCTC2003000163-3E_CraftBot Flow Idex 3D 300328 WiFi BCTC2003000163C_CraftBot Flow Idex 3D_CE_CERTIFICATE
