During the Orca Slicer for Craftbot iOS MAC installation the ZSTD library is missing.You can add this missing library to your system ins a safe way. Open a termina land type: ‘brew install zstd‘ If you do not have ‘brew’ Homebrew installed here is how you can install it Installing Homebrew on a Mac is […]
One of the greatest addition to the Orca Slicer is the ability to handle Craftbot 3 and FLOW IDEX printing modes. Now you can coose the needed mode under the printer selection Normal mode: Parallel mode: Mirror mode: Backup:
Starting with the 2025_07_25 Flow firmware and the Craftbot Plus/Pro/XL/3 firmware from 2019 you can use the Orca Slicer “Print” function. Here is how you can setup: FLOW Generation printers Select CraftbotFLow in the dropdown list Fill out the IP address, user and password filed and click TEST. IP, Username and password was set when […]
We are continously improving the user experience and release updates for Orca Slicer profiles. To update the profiles please download this package from here On Windows system:Extract it to a folder.Open Orca Slicer and go to the top menu, select help and Show Configuration Folder Overwrite the system folder from the extracted system folder: Restart […]
On Microsoft Windows: Download the package from this link and unpack it to somewher on your computer. (If you already installed Orca Slicer we recommend to use another directory to avoid mixup the slicers.) Start the program with the “orca-slicer.exe” program and pin it to the the taskbar by clicking right on the start menu […]
