Craftbot FLOW generation extruder is very capable to print soft flexible filament. For good result always do the following: – Swap the build sheet and print on the metal side. It helps to easily remove the object when it finished. – Use low print speed. A very soft material maybe need around 20-30mm/s print speed […]
When you want to setup a slicer software, you have to write a proper start and end script for the printer. Here are some examples and recommendation for our printers. CraftBot – Plus, 2, Pro Plus, XL Start GCODE: G28 X0 Y0; Home X and YG28 Z0; Home ZG21 ; mmG90 ; absG92 E0 ; […]
This is a test object you can print with CraftBot machines. The height of the disk is to set the heatbreak and heatsink distance. The wrench shape helps to service the hotend.
Please find this detailed document how to remove and put back the FLOW printers FAN set.
