Tips for Improving Print Quality with CraftBot
Quote from He-ra Yoon on 2024-07-26, 09:20Hello CraftBot Community,
I'm relatively new to 3D printing and have been using my CraftBot for a few months now. While I've had some successful prints, I'm still encountering issues with print quality, such as stringing and uneven layers. I’ve tried adjusting the temperature and print speed, but I’m not seeing consistent improvements.
Could anyone share some tried-and-true tips or tricks for achieving better print quality with the CraftBot? Specifically, I’m interested in:
- Optimal temperature and speed settings for different filament types.
- Best practices for bed leveling and adhesion.
- Recommended slicer settings or profiles.
I also check this: https://help.craftbot.com/wp-content/uploads/zendesk-export/FlowIdex_FlowIdexXL_usermanualmendix_2021_v01_ENG.pdf But I have not found any solution. could anyone suggest the best solution for this? Any advice or resources you can provide would be greatly appreciated!
Thanks in advance for your help!
Hello CraftBot Community,
I'm relatively new to 3D printing and have been using my CraftBot for a few months now. While I've had some successful prints, I'm still encountering issues with print quality, such as stringing and uneven layers. I’ve tried adjusting the temperature and print speed, but I’m not seeing consistent improvements.
Could anyone share some tried-and-true tips or tricks for achieving better print quality with the CraftBot? Specifically, I’m interested in:
- Optimal temperature and speed settings for different filament types.
- Best practices for bed leveling and adhesion.
- Recommended slicer settings or profiles.
I also check this: https://help.craftbot.com/wp-content/uploads/zendesk-export/FlowIdex_FlowIdexXL_usermanualmendix_2021_v01_ENG.pdf But I have not found any solution. could anyone suggest the best solution for this? Any advice or resources you can provide would be greatly appreciated!
Thanks in advance for your help!