Sending GCode (Flow IDEX)?
Quote from C on 2021-07-10, 16:36Maybe I'm just blind (and/or oblivious) but is there a way to send GCode commands from either Craftware or the browser interface of a Flow IDEX?
Similarly oblivious question #2) Is there a way to tether Craftware to the machine (ala Cura)? I ran a USB connection from my Flow IDEX into my Mac thinking Craftware would give me a way to select it and send commands but no such luck.
C
Maybe I'm just blind (and/or oblivious) but is there a way to send GCode commands from either Craftware or the browser interface of a Flow IDEX?
Similarly oblivious question #2) Is there a way to tether Craftware to the machine (ala Cura)? I ran a USB connection from my Flow IDEX into my Mac thinking Craftware would give me a way to select it and send commands but no such luck.
C
Quote from Craftware Team on 2021-07-13, 10:19Dear C,
- You can upload directly from the CraftwarePro:
1: From the save menu
2: From the bottom right export menu (if you select the Flow upload, the Craftware Pro will remember, and that would be the default export function to your printer- You can user your printer browser interface easily after you set it up: Flow_FlowXL_usermanual_2021_v01_ENG.pdf
Please refer to the using the web interface part.- Serial Connection:
The Craftware Pro's Serial Connection Terminal is under construction. However the printer supports standard serial communication, so you can use the any serial terminal to connect to your printer.Best regards,
András
Dear C,
- You can upload directly from the CraftwarePro:
1: From the save menu
2: From the bottom right export menu (if you select the Flow upload, the Craftware Pro will remember, and that would be the default export function to your printer - You can user your printer browser interface easily after you set it up: Flow_FlowXL_usermanual_2021_v01_ENG.pdf
Please refer to the using the web interface part. - Serial Connection:
The Craftware Pro's Serial Connection Terminal is under construction. However the printer supports standard serial communication, so you can use the any serial terminal to connect to your printer.
Best regards,
András
Uploaded files:- You need to login to have access to uploads.
Quote from C on 2021-07-16, 23:33Quote from Craftware Team on 13th July 2021, 10:19 amDear C,
- You can upload directly from the CraftwarePro:
1: From the save menu
2: From the bottom right export menu (if you select the Flow upload, the Craftware Pro will remember, and that would be the default export function to your printer- You can user your printer browser interface easily after you set it up: Flow_FlowXL_usermanual_2021_v01_ENG.pdf
Please refer to the using the web interface part.- Serial Connection:
The Craftware Pro's Serial Connection Terminal is under construction. However the printer supports standard serial communication, so you can use the any serial terminal to connect to your printer.Best regards,
András
Alas, I have a Mac. No Craftware Pro for me. ;(
Also:
That PDF link leads to 404, I'm afraid.
Quote from Craftware Team on 13th July 2021, 10:19 amDear C,
- You can upload directly from the CraftwarePro:
1: From the save menu
2: From the bottom right export menu (if you select the Flow upload, the Craftware Pro will remember, and that would be the default export function to your printer- You can user your printer browser interface easily after you set it up: Flow_FlowXL_usermanual_2021_v01_ENG.pdf
Please refer to the using the web interface part.- Serial Connection:
The Craftware Pro's Serial Connection Terminal is under construction. However the printer supports standard serial communication, so you can use the any serial terminal to connect to your printer.Best regards,
András
Alas, I have a Mac. No Craftware Pro for me. ;(
Also:
That PDF link leads to 404, I'm afraid.
Uploaded files:
- You need to login to have access to uploads.
Quote from Magori Andras on 2021-07-19, 09:32Dear C,
This link provides you the right user manual:
Craftbot FLOW user manuals – CraftBot Support PageThe Legacy Craftware offers the same functionality for direct upload. Just click on the Print Button and fill the form!
You can use the local IP address or the [myprinter].mycraftbot.com style url as address.
Best Regards,
András
Dear C,
This link provides you the right user manual:
Craftbot FLOW user manuals – CraftBot Support Page
The Legacy Craftware offers the same functionality for direct upload. Just click on the Print Button and fill the form!
You can use the local IP address or the [myprinter].mycraftbot.com style url as address.
Best Regards,
András
Uploaded files:
- You need to login to have access to uploads.