ForumCraftware: TroubleshootingNo Skirt or/and Brim generated

The Forum from now on is in READ ONLY mode. Thank you for participating, but this message board is being sunset.

No Skirt or/and Brim generated

#1 · 2022-02-02, 13:16

Hello,

i think this is a known issue but unfortunatly it's still not fixed.

In some cases there is no Brim or Skirt generated even there are enabled.

I don't know how to fix it an its realy annoying when i need e Brim (ABS) or just a skirt for a good start.

Thanks for the support

#2 · 2022-02-03, 13:46

Hi Joel,

It must be coming from a previous setting. Is the skirt/brim missing from the smart and easy strategy too?

Can you please try to duplicate your Slicer Settings, reset it to the factory default, and try with that again? (This way we can avoid that you loose your current settings)

Best Regards,

András

#3 · 2022-02-07, 08:15

Hello András,

i have tried it with the Smart & Easy Mode.

Even when i reset the setting there is no Skirt.

I also tried to use deafault printer & head settings an test it with another Printer.

BR,

Joel

#4 · 2022-03-07, 16:14

Hi Joel,

Next release is coming up pretty soon.
There will be several fixes for Skirt and Brim in it. When it will be out, can you check and see if everything works all right?

Regards,
Norbert