How to enable purge/wiper usage
Quote from Les Perkowski on 2022-04-25, 17:58Trying to enable purge/wiper at the beginning of single or dual extruder prints. I find that the extruder seeps all the filament as it is heating; resulting in the extruder being empty at the start of the print. This results in under extrusion. I thought of increasing the length of the skirt, but in easy/smart mode it is limited to 250mm, which is not enough. There seems to be no override at least in these modes, out side of changing to Default and changing the cut processor.
Would be nice to have a switch.
thanks les
Trying to enable purge/wiper at the beginning of single or dual extruder prints. I find that the extruder seeps all the filament as it is heating; resulting in the extruder being empty at the start of the print. This results in under extrusion. I thought of increasing the length of the skirt, but in easy/smart mode it is limited to 250mm, which is not enough. There seems to be no override at least in these modes, out side of changing to Default and changing the cut processor.
Would be nice to have a switch.
thanks les