The CraftBot flow printers currently do not support the standard RepRap acceleration GCodes, mainly M201 and M204.
This results in a error when acceleration is used from a slicer other than CraftWare.
https://reprap.org/wiki/G-code
https://support.craftbot.com/hc/en-us/articles/360007748177-CraftBot-FLOW-Generation-G-M-code-cheatsheet
Additionally, the CraftWare acceleration codes M1203 and M1204 have different parameters to RepRap, so replacing them does not create compatibility.
The CraftBot flow printers currently do not support the standard RepRap acceleration GCodes, mainly M201 and M204.
This results in a error when acceleration is used from a slicer other than CraftWare.
https://reprap.org/wiki/G-code
https://support.craftbot.com/hc/en-us/articles/360007748177-CraftBot-FLOW-Generation-G-M-code-cheatsheet
Additionally, the CraftWare acceleration codes M1203 and M1204 have different parameters to RepRap, so replacing them does not create compatibility.
