Craftbot Plus PRO freeze after updateing firmware!
Quote from Dávid Fülöp on 2025-03-03, 11:35Hello! I have upgraded the firmware to the lastest versions. I have observed that it froze sometimes in mid print at 52-55%. What could be the problem?
Hello! I have upgraded the firmware to the lastest versions. I have observed that it froze sometimes in mid print at 52-55%. What could be the problem?
Uploaded files:- You need to login to have access to uploads.
Quote from Olivia Anderson on 2025-07-23, 08:33Quote from Dávid Fülöp Block Blast on 2025-03-03, 11:35Hello! I have upgraded the firmware to the lastest versions. I have observed that it froze sometimes in mid print at 52-55%. What could be the problem?
Re-slice the model: Go back to your slicer software (e.g., CraftWare, Cura, PrusaSlicer) and re-slice the 3D model. Make sure you're using a stable version of your slicer.
Quote from Dávid Fülöp Block Blast on 2025-03-03, 11:35Hello! I have upgraded the firmware to the lastest versions. I have observed that it froze sometimes in mid print at 52-55%. What could be the problem?
Re-slice the model: Go back to your slicer software (e.g., CraftWare, Cura, PrusaSlicer) and re-slice the 3D model. Make sure you're using a stable version of your slicer.
Quote from Michael Lewis on 2025-08-04, 03:59Quote from Dávid Fülöp on 2025-03-03, 11:35Hello! I have upgraded the firmware to the lastest versions. I have observed that it froze sometimes in mid print at 52-55%. What could be the problem? soccer random
Consider reverting to an older firmware version to see if the error still occurs. If the error consistently occurs around the same percentage of print progress, it is probably related to a specific section of the G-code being processed incorrectly. It is possible that the new firmware version contains bugs related to mid-processing, such as when processing specific G-code commands, or that new features have been added. You can check the manufacturer's changelog or forums to see if anyone else has experienced the same error.
Quote from Dávid Fülöp on 2025-03-03, 11:35Hello! I have upgraded the firmware to the lastest versions. I have observed that it froze sometimes in mid print at 52-55%. What could be the problem? soccer random
Consider reverting to an older firmware version to see if the error still occurs. If the error consistently occurs around the same percentage of print progress, it is probably related to a specific section of the G-code being processed incorrectly. It is possible that the new firmware version contains bugs related to mid-processing, such as when processing specific G-code commands, or that new features have been added. You can check the manufacturer's changelog or forums to see if anyone else has experienced the same error.