View Settings
| ◀ Camera gizmo | CraftWare Pro User Manual > User Interface > 3D View > View Settings | TreeView ▶ |
Introduction
View settings will help in visualization. Sometimes it is useful to modify the appearance of the objects in the scene, or even modify the camera's field of view.
Camera projection & FOV
Camera field of view (FOV) can be changed using the mouse wheel on the perspective/orthographic icon. By clicking on this icon the projection will toggle between orthographic and perspective.
View modes
Depending on the actual page selected, different view settings may be available.
Grid
Grid will turn on/off the 3D scene view's ground grid pattern.
Wireframe
Wireframe turns on/off the loaded 3D model's edges.
Bed, printer, extruder model
Bed, Printer model can be turned on/off in the Prepare Page. It will show the actual printer's 3D model if available. The extruder model only available in the GCode Page.
HQ Gcode
High Quality Gcode is available in the GCode Page. Older computers with less graphical computing power should NOT use HQ Gcode to enhance visual smoothness while navigating in the Gcode page.
UI Scale
CraftWare Pro has its own UI scaling technique. Using the slider you can scale up/down the UI components.