Page Navigation
| ◀ Open Files | CraftWare Pro User Manual > Quick Start Tutorial > Page Navigation | Arrangement ▶ |
Introduction
The Page Navigator helps you to navigate through the slicing workflow, and changes the context according the state of the process.
Pages
A Page is a state of the slicing workflow. On each Page you can accomplish different tasks, so the appearance and the toolset changes according to the actual Page
Design Page
On Design Page you find yourself and your models in a design context. You can have the final touches on your models before printing them.
On Design Page you can:
- Repair models
- Edit models
- Customize models
- Create models
Prepare Page
On Prepare Page the main objective is to configure every aspect of the slice process and thus the printing procedure.
On Prepare Page you can:
- Arrange, prepare the printing layout
- Create helper objects
- Assign metadata to the objects
- Configure Environment
- Configure Slicer
- Start the Slice Process
GCode Page
The main purpose of the GCode Page is to examine, validate the simulated GCodes and get useful information about them. CraftWare Pro utilizes a GCode simulation engine, so the commands are processed according the actual printer.
On GCode Page you can:
- Visualize the Simulated GCode layer-by-layer, command-to-command
- Examine and validate the GCode correctness
- Have dynamic statistics about the printing times and filament consumption
- See information coded colouring methods
- Export or upload the GCode