Support
| ◀ Support Tools | CraftWare Pro User Manual > User Interface > Prepare Page > Support Tools > Support | Pillar ▶ |
Introduction
You can generate support automatically, or paint the object using a circular brush where you want the support to be touching the object.
The generated support Object is a horizontally striped object with the same colour (strategy) as the original model.
Automatic support
The support placing algorithm will place supports to the object where needed based on the minimum slope parameter with considering the local minima too.
Support painting
You can paint the surface of the models using a circular brush that requires support. The radius of the brush can be changed in the parameters.
You can also edit or refine the support configuration offered by the Automatic Support tool. If it is generated before.
Left click brushing to extend the supported area and Right click brushing to remove from the current selection patch.