Contour Tools

From CraftWare Pro User Manual
< CraftWare Pro User Manual‎ | UserInterface‎ | DesignPageManual/UserInterface/DesignPage/ContourTools /
Revision as of 09:13, 1 September 2022 by Cwproadmin (talk | contribs) (1 revision imported)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search
◀ Surface Tools CraftWare Pro User Manual > User Interface > Design Page > Contour Tools Prepare Page ▶

Introduction

Contour tools.png

Contour lofter

Connects two contours. These contours can be picked (selected) and also the method of the connect algorithm. You have to press the start picking button in order to select a contour. The contours can be selected from the tree view as well. After you have both contours selected, you can loft them.

Contour lofter params.png

Contour lofter in action.png

Contour filler

Fills a contour (hole) of a 3D model. Prior using this tool, the contour or its parent should be selected. At the moment there is no additional parameters for contour filling.

Contour filler params.png

Contour filler in action
Retrieved from "https://help.craftbot.com/wiki/index.php?title=Manual/UserInterface/DesignPage/ContourTools&oldid=261"