View source for Manual/UserInterface/GCodePage/InformationPanels

{{DISPLAYTITLE:Information Panels}}
{{#invoke:Navigation|create_links}}
== Introduction ==

Using these tools, you can gather important information about the state and outcome of the slicing. 

[[File:Gcode info panels.png|frameless|border]]

== Show legend ==

This feature tightly coupled with the actual coloring type selected. For example, it will show the legend of all the occurring GCode segment types if segment type coloring is selected.

== Show GCode ==

Displays the actual GCode commands which will be executed by the 3D printer.

== Show extruder statistics ==

Turning on this feature will display a small popup where all the necessary information of the current state will be shown.

Some values also show the delta values for the current command between brackets if there's any.

[[File:Extruder stats.png]]

== Show statistics ==

Will display a general statistics of the whole print process.

[[File:Gcode stats.png]]

== Show layer pauses ==

This function reveals a GCode pause management controls where you can add / remove layer pauses, and also see the pause position in the 3D view and on the vertical slider.

[[File:Layer pause controls.png]]

[[Category:User Interface]]