View source for Manual/UserInterface/3DView/ViewSettings

{{DISPLAYTITLE:View Settings}}
{{#invoke:Navigation|create_links}}
== Introduction ==

View settings will help in visualization. Sometimes it is useful to modify the appearance of the objects in the scene, or even modify the camera's field of view.

== Camera projection & FOV ==

Camera field of view (FOV) can be changed using the mouse wheel on the perspective/orthographic icon. By clicking on this icon the projection will toggle between orthographic and perspective.

[[File:View settings.png|frameless|border]]

== View modes ==

[[File:View settings open.png|frameless|border]]

Depending on the actual page selected, different view settings may be available.

== Grid ==

Grid will turn on/off the 3D scene view's ground grid pattern.

== Wireframe ==

Wireframe turns on/off the loaded 3D model's edges.

== Bed, printer, extruder model ==

Bed, Printer model can be turned on/off in the [[Manual/UserInterface/PreparePage]]. It will show the actual printer's 3D model if available. The extruder model only available in the [[Manual/UserInterface/GCodePage]].

== HQ Gcode ==

High Quality Gcode is available in the [[Manual/UserInterface/GCodePage]]. Older computers with less graphical computing power should NOT use HQ Gcode to enhance visual smoothness while navigating in the Gcode page.

== UI Scale ==

CraftWare Pro has its own UI scaling technique. Using the slider you can scale up/down the UI components.

[[Category:User Interface]]